TUSAŞ and TEI: From Flying Designs to Sustainable Production
KAAN, HÜRJET, HÜRKUŞ, ANKA and GÖKBEY reveal different stages of capability in design, production, propulsion and certification.
KAAN: From first flight to a development programme
KAAN’s first flight on 21 February 2024 was an important milestone in combat-aircraft design, production, integration and flight testing in Türkiye. TUSAŞ records the second flight on 6 May 2024. This alone does not establish validation of every mission system, clearance of the full flight envelope or delivery to an operational fleet.
TUSAŞ’s statement of 1 August 2025 describes the definitive sales contract for 48 KAAN aircraft for Indonesia as a binding procurement milestone. Developing manufacturing capability and providing training support are also part of the cooperation. This is a concrete development that strengthens the programme’s international customer and partnership dimension. It does not, however, imply that the contracted aircraft have been delivered or entered service in Indonesia. Prototype status, production standard, customer configuration and mission readiness must be tracked separately.
HÜRKUŞ-II: Military certification
HÜRKUŞ and HÜRJET target different stages of training. The turboprop HÜRKUŞ focuses on developing basic flying skills; the jet-powered HÜRJET addresses advanced training and transition to mission aircraft. The September 2026 announcement that HÜRKUŞ-II had received a military type certificate highlights evidence-based assessment of the design. TUSAŞ reports validation of 1,790 requirements across 12 disciplines, review of 950 evidence documents and completion of 153 tests. These figures show that airworthiness work consists of more than a flight demonstration.
HÜRKUŞ-II: Acceptance, delivery and contracts
The Ministry of National Defence confirmed that HÜRKUŞ-II acceptance activity took place on 28 September 2026; TSKGV also announced delivery separately. This dossier therefore does not describe the programme merely as a delivery plan. However, the addition of two more aircraft to the inventory in the Ministry’s statement of 22 October 2026 is, by its own wording, planned. Those additional aircraft are not added to the completed total. TUSAŞ’s October announcement likewise presents the agreement for 14 HÜRKUŞ-II aircraft for Azerbaijan as future deliveries.
[5] Ministry of National Defence · [6] Turkish Armed Forces Foundation · [7] TUSAŞ · [8] Ministry of National Defence
HÜRJET: Testing prototypes and production aircraft
HÜRJET’s first prototype flew on 25 April 2023 and the second on 12 November 2024. TUSAŞ’s current product page reports more than 500 test flights for the two prototypes. A more recent milestone is the first flight, on 30 August 2026, of the first aircraft intended for delivery to the Air Force. This production and testing threshold should be stated clearly; the announcement does not say that delivery is complete. Alongside the product page’s 2026 delivery target, other public statements contain different schedules, making it necessary to give target dates together with the date of their source.
Spain’s training system: A future delivery schedule
The agreement for a HÜRJET-based, 30-aircraft training system in Spain is a measurable example of cooperation with European aerospace industry. Airbus’s statement of 28 April 2026 describes adaptation to Spanish requirements together with training and maintenance services. The earlier official schedule envisages deliveries in the initial configuration in 2028–2029, followed by conversions incorporating Spanish content in 2031–2035. These are forward-looking programme dates. Spain’s selection does not mean that the aircraft are currently serving in the Spanish air force.
GÖKBEY and ATAK: Different development paths
GÖKBEY and T129 ATAK are not two names for the same programme. GÖKBEY is a utility helicopter; its first user delivery took place on 29 October 2024, and TUSAŞ announced a fourth delivery to the Gendarmerie in August 2025. TUSAŞ’s website categorises T129 ATAK as a joint-development programme, and it is used in operations. This description does not diminish the systems-integration and production capability acquired from an existing design; it accurately explains the programme’s origins. Engine, mission and certification status must be assessed separately for the two platforms.
The configuration covered by GÖKBEY’s certificate
GÖKBEY’s national type certificate from the Directorate General of Civil Aviation does not extend to every engine and mission configuration. The September 2026 data sheet lists the LHTEC CTS800-4AT. Flights with the TS1400 are separate development evidence; they do not establish that all series-production helicopters with a domestic engine are certified and delivered.
[15] Directorate General of Civil Aviation · [16] Directorate General of Civil Aviation · [17] Directorate General of Civil Aviation
TEI-PD170: Flight and series production
TEI dates the PD170’s first flight on ANKA to 27 December 2018 and series production to 2019; it reports flights on ANKA, AKSUNGUR and TB3. Manufacturer-reported endurance and altitude results in particular trials should not be generalised to every payload and weather condition.
TEI-TS1400: Flight, power tests and certification
The TS1400 made its first crewed flight on GÖKBEY on 19 April 2023. TEI’s bulletin of 28 June 2024 describes endurance tests and a power trial for an emergency scenario with one engine inoperative. The frequently cited 1,740 hp figure applies to a 30-second emergency condition; it should not be described as continuously available cruise power. Applying EASA CS-E test conditions does not alone establish that EASA has granted a type certificate. The current product page describes development of a certified engine as a programme objective.
TF6000 and TF10000: Development objectives
The TF6000 and afterburning TF10000 are turbofan programmes aimed at acquiring technology in a higher thrust class. TEI’s current pages describe them in development terms: a 6,000 lbf class for TF6000, and 6,000 lbf dry and 10,000 lbf afterburning thrust classes for TF10000. These values should be labelled as design/product targets. Displaying both engines at 2026 exhibitions does not demonstrate completion of aircraft integration, flight certification or production delivery to a user. Calling the TF6000 KAAN’s final engine is also incorrect; TEI links the programme to technology acquisition on the path towards a larger combat-aircraft engine.
Maturity in engine development
Progress in engines requires work at different maturity levels to proceed together: one family may be in series production while another is flying and another engine is being tested on the ground. TEI’s component production for international engine programmes and development of advanced manufacturing capabilities form another side of this expertise. Original design, licensed production, maintenance capability and component supply are distinct contributions. Lasting success depends on the joint maturation of materials and production repeatability, long-duration endurance, maintenance life and certification evidence.
Continue your research.
Turkish Aviation History
From the accounts of Hezarfen and Lâgarî to the Ottoman aviation organisation, and from the Republic’s pioneers to contemporary aviation.
02 / RESEARCH DOSSIERWorld Aviation History
Source-linked world aviation history, from balloons and gliders to the first powered aircraft, jets and digital flight systems.
03 / RESEARCH DOSSIERAviation Technologies in Türkiye
Contemporary achievements in Turkish aviation: dated programme status for aircraft, uncrewed systems, avionics, engines and simulation.
REFERENCES / OPEN RESEARCH
Follow the evidence.
- KAAN ↗
- TUSAŞ’s Steel Wings: The Second Anniversary of KAAN’s Historic Flight ↗
- Turkish Aerospace and Indonesia Sign Official Contract for the Sale of 48 KAAN Turkish Fighter in Istanbul ↗
- A Major Achievement for HÜRKUŞ-II ↗
- Weekly Press Briefing at the 2nd Air Maintenance Factory Directorate in Kayseri, Celebrating Its Centenary ↗
- New-Generation HÜRKUŞ Delivered to Air Force Command ↗
- Turkish Aerospace Exports HÜRKUŞ to Azerbaijan ↗
- Ministry of National Defence Weekly Press Briefing, International Best Military UAV Team Competition ↗
- HÜRJET ↗
- A Historic HÜRJET Flight ↗
- Airbus leads national industry launch of Spain’s new combat training system ↗
- Airbus to lead Spain’s new combat training system ↗
- T129 ATAK ↗
- Fourth T625 GÖKBEY Utility Helicopter Delivered to the General Command of the Gendarmerie ↗
- Türkiye’s First Domestically Developed Helicopter Is Ready to Fly ↗
- T625 Type Certificate Data Sheet TR.R.001 Rev01 ↗
- Aircraft and Component Certification ↗
- TEI-PD170 Turbodiesel Aviation Engine ↗
- TEI-TS1400 Engine Reaches a Record Power Level of 1,740 hp ↗
- TEI-TS1400 Turboshaft Engine Development Project ↗
- TEI-TF6000 Turbofan Engine ↗
- TEI-TF10000 Turbofan Engine ↗
- TEI at SAHA 2026 with Its National Aviation Engines ↗
